Wet & Forget Outdoor Cleaner Xtreme Reach™ Hose End Refill

NEW! Wet and Forget Xtreme Reach™ Hose End 48oz. REFILL. Just attach the reusable Xtreme Reach™ Nozzle from your original Wet and Forget Hose End bottle for an additional 2,000 sq. ft. coverage. Easily clean any large outdoor surface including roofs, siding, decks, and high elevations without scrubbing or using bleach! Safe for use on virtually any outdoor surface. Just wet it, and forget it! The Xtreme Reach™ Nozzle sprays up to 30 ft. high, so you can apply to hard-to-reach areas without a ladder. Wet and Forget works over time with the rain and wind to gently clean up green and black stains caused by moss, mold, mildew, and algae. There’s no scrubbing, no rinsing, and no power washing. Wet and Forget’s gentle formula contains no bleach or acidic chemicals so it won’t harm the surfaces being cleaned. Wet and Forget properly cleans the surface so it stays cleaner, longer. Life’s dirty. Clean easy with Wet and Forget.

Wet & Forget Xtreme Reach™ Hose End Refill:

• Jet Tip: Sprays up to 30 feet high to treat roofs and 2nd story siding
• Fan Tip: Treat large surfaces like patios, driveways, and decks in minutes
• Just wet it and forget it – no scrubbing, rinsing or power washing
• Removes green and black stains caused by moss, mold, mildew and algae over time
• Green stains clean up in a week with rain, black stains and moss clean up in a few months
• One 48 oz. bottle covers up to 2,000 square feet
• Bleach-free cleaner making it safe for use on virtually any outdoor surface
• Surfaces stay clean for 1+ years in most cases
• Safe around plants when used as directed
• Unlimited shelf life
• Simply swap out the Xtreme Reach™ Nozzle from your original Hose End to the new Refill

DIRECTIONS: Unscrew and remove Xtreme Reach™ nozzle from original bottle. Remove cap and seal from refill bottle. Securely tighten Xtreme Reach™ nozzle into new refill bottle. Connect the bottle of Wet & Forget Xtreme Reach™ Hose End to your hose. Attach the Fan Tip or Jet Tip to the nozzle. Turn your water faucet on and thoroughly rinse nearby plants on the ‘WATER’ setting to protect plants from product overspray. When ready to apply, turn the black dial all the way until the ‘ON’ position is shown. Apply Wet & Forget on a cool, dry, windless day, with no rain in the forecast for 4-5 hours. Often the evening or early morning is the best time to apply; when evaporation is minimal. Allow treated surface stays wet with Wet & Forget for an extended period of time. Apply Wet And Forget at any temperature above 55 degrees. Once applied your job is done, there’s no scrubbing or rinsing. Wet & Forget does the rest.